HomeElectrificationImproving safety for trackside installations

Across the UK, the rail network supports over 4.6 million passenger journeys a day and over 20,000 miles of track. As numbers grow year-on-year, delivering a reliable and modern service for today’s ‘always online’ passenger has placed great pressure on the industry.

Future success is dependent on the network’s infrastructure to support growth and provide passengers with the online connectivity they crave. With an ambitious programme of railway upgrades underway, the focus is now on installing the latest technology and renewing out-of-date equipment. The construction workforce is critical to achieving this task, and ensuring they remain safe while on site has never been more important.

Power and communications

Behind the scenes lies a hidden network of thousands of cables that carry power, data, communications, signals and other vital operating services from station to station and on to the control room. This extensive and complex network of ‘veins’ and ‘arteries’ is the very lifeblood of the railway, running alongside the tracks in a series of enclosed troughs and ducts.

Protecting these cables from severe weather, corrosion, damage, and wear and tear is absolutely crucial to keeping the railways running. However, the trackside location means carrying out repairs, upgrades and extensions presents a unique set of problems for the engineers who are responsible for looking after this vitally important network.

Installing a new troughing system was traditionally a time-intensive task. Bulky materials and numerous fixings made it arduous, with 140 metres of standard elevated troughing taking over 40 hours to complete when spaced at 1.5 metre centres, based on a team of four working an eight-hour shift, consequently increasing the dangers to engineers working trackside.

Sadly, despite a decrease in the number of workforce-related deaths and injuries in recent years, accidents are still a threat to trackside engineers. Refining products to create better and safer working conditions is paramount.

Extensive research into product improvement by Scott Parnell resulted in the development of a range of improved troughing products that would significantly cut the time spent on site as well as reduce the need for lengthy maintenance procedures in the future. Made of corrosion-resistant GRP (glass-reinforced plastic), the ArcoSystem is manufactured in complete, ready-to-install sections and supplied in lengths of six metres. Each six-metre piece will simply fit together, sliding into position without the need for hundreds of individual nuts and bolts.

This durable cable management system is elevated above the ground, supported on sigma posts stationed at six-metre intervals. The connection plate is bolted to the post, forming a durable cable duct base, complete with a snap-on lid which can be opened easily with a specially developed tool.

This light-weight and pre-made troughing has significantly reduced construction times, by at least half on average against standard ground trough, as it is much more efficient to simply dig a hole every six metres than it is to dig a trench the length of the route and backfill to the trough shoulder thereafter. ArcoSystem has been measured by customers to be at least five-times quicker to install than other elevated trough systems.

For future maintenance, the cables are easily accessible, again reducing the amount of time spent on the trackside and limiting the danger for trackside workers.

Training for the future

Keen to develop further ideas aimed at safeguarding construction workers, Scott Parnell launched an initiative to support the training provision in this sector through permanent ‘training installations’ of its elevated cable troughing system at client premises. This, coupled with hands-on training from its experts, offers engineering teams the chance to practise and become familiar with the product in a safe and controlled environment well in advance of the installation phase of a project.

The opportunity to get to grips with products and tools free of charge has gone down well in the industry. A permanent client-site installation was used to support engineering teams who were working on the Weaver to Wavertree Signalling Upgrade Project (W2W) in Liverpool.

The initiative aims to prepare clients and contractors to deal with the next generation of cable troughing by providing facilities that support their work and underpin their welfare. Companies have found the training facility delivers commercial benefits as familiarity with equipment speeds up the whole construction process – saving money and minimising service disruption.

The future success of the industry will depend on its ability to meet customer demands through faster, more connected services. Laying the foundations to support this system will fall to the engineers and construction professionals in the field. Product innovation and training have never been more important as the UK’s railway network strives to meet the challenges of the digital age.


Written by Matt Davidson, rail director at Scott Parnell.



Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.