HomeRolling Stock and ComponentsImproved transmissions for 158s

Improved transmissions for 158s

Listen to this article

It is no exaggeration to say that the Cummins engine, Voith T211 hydrodynamic gearbox and Gmeinder final drive helped to transform diesel multiple unit performance in the UK during the 1980s. Over 2,500 examples of the T211 transmissions (out of 40,000 worldwide) are fitted to nine classes of British DMU, including the Pacers and class 15X units.

In those days, reliability and performance were valued above all else and the Voith T211 transmission delivered that requirement. Fuel economy and CO2 emissions are now much more important, and hydro- mechanical drives generally suffer higher losses than mechanical transmissions under certain operating conditions.

Parallel path

To respond, Voith now offers the DIWARail (pronounced DivaRail) hydro-mechanical gearbox. It is based on an automotive product of which many thousands are in successful operation. In principle, this is a torque converter combined with a four-speed epicyclic gearbox.

The clever part is that there is a parallel path to transmit torque between the input shaft and the gearbox – a direct drive and via a torque converter in first gear. These are connected to the gearbox that is controlled to allow the mechanical drive to take over gradually from the torque converter as input speed rises until the point that the less efficient torque converter is completely locked out of the drive train.


This Power-Split principle in first gear allows a higher range for starting that eliminates the second gear stage of comparable transmissions and ultimately reduces the number of gear changes by up to 50 per cent.

Over 2,000 DIWARail transmissions – the rail version – have been used since 1993. The latest incarnation has had a patented, integral reversing gear added to the rear of the gearbox. Clearly this is not needed on the automotive version as trucks and buses are not expected to be able to operate at full speed backwards! Some 150 of these transmissions have been delivered.

Service trial

To demonstrate the performance and economy that the gearbox offers, Voith fitted a Class 158 DMU with two DIWARail transmissions for an in-service trial in collaboration with Angel Trains (the owner) and Arriva Trains Wales (the operator). The aim was to demonstrate that the hydro-mechanical transmission would be reliable, improve efficiency, and reduce fuel consumption compared to the currently installed transmissions. The trial has been running since June 2015 with over 150,000 miles already accumulated.

During a recent meeting of the Railway Industry Association’s Traction and Rolling Stock Special Interest Group, Voith’s Dave Taylor described the project and the results to date.

He said that the trial has been commissioned as a collaborative venture to demonstrate and evaluate the benefits of the new transmissions for fitment on UK DMU fleets.

Voith provided a turnkey installation covering design, manufacture, project management, installation and commissioning. Besides the DIWARail transmission, Voith also delivered a control system, all brackets and guards, Voith ‘one million mile’ cardan shafts and a new hydraulic torsion vibration damper (Hydrodamp).

The primary business driver for the trial was to reduce fuel consumption, due to the more efficient transmission, and the result has been a reduction of maximum fuel consumption by up to 16 per cent. Depending upon the duty cycle of the particular route, this figure could be increased further. Generalising, the more frequent the stops and starts, and the lower the average train speed, the better the improvement in fuel consumption.

In addition to reducing fuel consumption, which is accompanied by a drop in all engine emissions (16 tonnes carbon reduced/year), the DIWARail transmission offers a weight saving of over 220kg compared to the currently installed transmission and a saving of over 150 litres of oil over the life of the transmission due to lower oil change frequency. This latter also removes the need for two oil changes, with the accompanying reduction in labour costs.

The installation of the Voith Hydrodamp moves the critical natural frequencies in the driveline below the operating speed and hydraulically dampens torque peaks. This protects all connected system components against harmful vibrations and thus increases their life and availability.


Complete success

Voith fitted the components on both cars of the class 158 units in just 13 days – half the time agreed with the partners in the project. The train was released for its first main line run on the following day, giving a total project fitment time of just 14 days for return to service. A significant contributory factor to the rapid return of the vehicle to revenue-earning service was the support and flexibility of the ATW staff at Cardiff Canton depot working in conjunction with Angel Trains. Construction of a full-scale mock-up of the complete system to ensure that the final items would fit when delivered early in the design phase helped de-risk the installation.

In the 12 months since the trial started, the performance has been assessed on a number of different duty cycles to validate the modelled performance. In addition, a remote monitoring system – DIWA SmartNet – has been used to assess performance information about the gearboxes remotely.

Dave Taylor said that the trial has been extremely successful and the two transmissions are running in daily service with no problems accumulating jointly over 25,000 miles each month. There have been no reliability issues, and fuel consumption has been in line with the forecasts. In short. this project clearly demonstrated the benefits of introducing modern and more efficient transmissions as a retro-fit concept.

He added that designs are also being developed for other British DMU modernisation projects where the Voith DIWARail transmission can be used in conjunction with new or existing diesel engines. Clearly these benefits are available for new build too.

Dave Taylor concluded that Voith is the only supplier who can offer a complete integrated driveline from a single source. The scope of supply can also be extended to include replacement final drives, RailPack (complete raft mounted engine/ transmission/cooling system) drive packages and cooling units, all of which can be sourced from Voith.

Written by Malcolm Dobell



Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.