Home Environment Barnehurst cutting reopened after landslip closes the Bexleyheath line for a week

Barnehurst cutting reopened after landslip closes the Bexleyheath line for a week

The cutting at Barnehurst, on the Bexleyheath line between Lewisham and Dartford, Kent, reopened on Monday 18 February after being closed for a week.

When the cutting face slipped at around 03:30 on the morning of Monday 11 February, it was the fourth time it had done so since 2010.

A landslip at Barnehurst cutting closed the railway . (Network Rail)

Opened in 1895, the cutting faces are steep, which lays them open to problems with slips. As Derek Butcher, Network Rail’s route asset manager for geotechnical engineering, explained, the cutting was already monitored using both CCTV and remote condition monitoring.

So when the cutting face slipped without warning, the monitoring alarms allowed the railway to be closed with no risk to passengers.

After examination by engineers, the decision was taken to clear the site and then to make the cutting safe by using H piling – H-shaped steel beams driven into the ground with concrete panels between them to build a wall that will prevent slippage in the future.

H-posts were installed along with concrete infill panels. (Network Rail)

300 tonnes of earth and trees were removed and then work could start on the 30 metres of wall.

Piling was finished by Friday 15 February and the wall infill panels completed over the weekend. 

Work was also undertaken to ensure the track was safe, replacing and replenishing contaminated ballast, and after test trains ran through on Sunday evening to check the repairs and test the signalling, the railway was ready to open on Monday.

RailEngineer
RailEngineerhttp://www.railengineer.co.uk
Rail Engineer is the leading independent quality monthly magazine for engineers, project managers, directors and leading rail executive decision makers. Head to www.railsubs.com to make a free subscription to RailEngineer magazine or one of its sister publications.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Must Read

“A little water never hurt anyone…”

Plantworx & Railworx a success despite the summer weather Every two years, the Construction Equipment Association organises a big...

Rail Electrification: Rebuilding Confidence

The Institution of Mechanical Engineers recently held the latest in a series of roughly biennial seminars highlighting railway electrification, with the emphasis being mainly...

Barnard’s Lock Underbridge

A Spongy and Successful Lift Barnard’s Lock is a rail underbridge structure spanning the river Kennet, located 3.7km west...

New main-line interlocking enters service

The Shepperton branch line in the south west of London and north Surrey, which is part of the Feltham signal box area, connects...

Railway signalling equipment power system earthing

A railway must be supported with a safe and reliable power system for signals, points, interlockings and communications. This power system must...