Home Events As seen at Railtex - What caught the editor's eye

As seen at Railtex – What caught the editor’s eye

If you’ve been going to the two main UK railway exhibitions (Railtex and Infrarail) over the years, perhaps you might have noticed a recent change. Certainly it was very evident this year. The change? Well, Railtex always seemed to be drivers’ seats, upholstery, platform signs, lighting – you get the drift? This year all the old favourites were there of course, but who would have expected rail steel, road rail machinery, PLC technology or permanent way tools? So it seems that Railtex is subsuming the rail infrastructure market as well. Can Infrarail do the reverse with rolling stock? Perhaps not so easily while its name starts with ‘Infra’.

One of the more exotic tools to be found in a diehard DIY mechanic’s toolbox is a bearing puller. Used, abused, adapted, they sometimes work – they often fail because either they don’t fit or they’re not up to the task in hand. In contrast, the Betex HXPM 100 tonne puller supplied by Bega Special Tools can’t fail. It is a truly impressive bit of kit that’s used to pull wheels off rail axles. Mind you, the toolbox would take a little lifting.

There was a stand proudly displaying chrome plated Mills clips – who on earth makes a clip for a fastening system that had its heyday back in the 60s? It’s Henry Williams of Darlington who not only make new obsolete fittings, but also manufacture a whole range of trackside cabinets for the railways – and motorways too it turns out.

Displaying a product that seems so simple yet so effective was Kwik-Step who make modular galvanised staircases for embankments or cuttings. Bent strips of steel, long steel nails. Basically, that’s it – although refinements like handrails are added as well.

Last month in The Rail Engineer we featured a range of radio- controlled vehicle shunters manufactured by Zweihoff. A far cry from the rumbling 08 shunter, these machines are no larger than a dining room table. And, of course, similar machines were featured at Railtex. Chunky and bright yellow, there were examples displayed by Harmill and Windhoff.

Exhibitions are great places to have a close look – a really close look – at components that would normally be well out of bounds in service. Anything to do with overhead line equipment comes into this category. Even more remote are the bits and pieces on top of electrified rolling stock. So, an exhibition is the time to have an up close stare at pantographs, and Brecknell Willis had one you could touch. There’s always a slight unease though – just in case!

What’s the prime task of a permanent way engineer? Keeping a train on the rails is probably high up on the list. So it was a little un-nerving to see a bogie sat in the ballast. The Hitachi exhibit was impressive, shiny, technically perfect – but it wasn’t sitting on rails, it nestled cosily up to its flanges in stone. Odd.

One of the treats of Railtex is seeing beautiful examples of heavy machining. They’re complete fantasy of course as in real life they’ll be well out of sight and probably a good deal grubbier. But as pieces of exquisite engineering sculpture I would mention DePe Gear with their display of assorted cogs, Lucchini wheel set and axles, Associated Rewinds with their polished traction innards, ZF with sectioned transmission systems and Sauter Bachmann AG with some huge precision gears.

And finally, there were the folks striding round the hall in brightly coloured tee shirts emblazoned with their company details. But I can’t report who they were representing as everything was in a large square bar code and I’m not fluent in barcodese.

Grahame Taylor
Grahame Taylorhttp://www.railengineer.co.uk

SPECIALIST AREAS
Structures, railway systems, railway construction, digital data


Grahame Taylor started his railway career as a sandwich course student with British Railways in October 1965, during which he had very wide experience of all aspects of railway civil engineering.

By privatisation, he was in charge of all structural and track maintenance for the Regional Railways’ business in the North West of England.

In 1996, he became an independent consultant, setting up his own company that specialised in the capturing of railway permanent way engineering knowledge using the then-new digital media. As a skilled computer programmer he has developed railway control systems and continues to exploit his detailed knowledge of all railway engineering and operations.

He started to write for Rail Engineer in 2006, and became editor two years later. During this time, he has written over 250 wide-ranging articles and editorials, all the while encouraging the magazine’s more readable style of engineering reporting.

1 COMMENT

  1. The ZWEIHOFF are OK but the real jewel in the crown in modern day Shunters is the UNILOK shunting locomotive. Bullet proof and goes on forever. I see Alstom have some in Wembley

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Must Read

Dawlish to get new sea wall

Government funding of £80 million has been announced to provide a new sea wall at Dawlish that will improve protection both for the railway...

Unusual bridge strike closes one track of West Coast main line

An unusual bridge strike closed one track on the West Coast main line and caused a speed restriction to be imposed across...

Stuart Calvert to be new Digital Railway head

Stuart Calvert, director of programme technical services and supply chain at Network Rail’s Group Digital Railway (GDR), has been announced as its new managing...

Major organisation changes at Network Rail

Network Rail has announced sweeping changes to its organisation following the completion of new chief executive Andrew Haines’ ‘100 Day Review’.

Danny Di Perna replaces Laurent Troger to head Bombardier Transportation

It’s all change at the top as Laurent Troger resigns as president of Bombardier Transportation to “pursue opportunities outside the company”. Danny...